LEXUS LS430 SESSIONS Ver. Redcat Racing Thunder Drift Belt Drive RTR Custom Painted Electric RC Drift Cars Now With 2.4Ghz Radio!!!
On Your Mark! Get Set! DRIFT!!!
RC-Tradingpost is proud to introduce the Redcat Racing Electric Thunder Drift RC Drift Car.
You will get the complete ready to run electric rc drift car from Redcat with ultra slick drift tires mounted on black rims, 2.4Ghz radio system already installed with remote controller included, and a 7.2 volt battery and charger, but instead of receiving the boring stock Redcat body that everyone else runs, you will recieve this custom painted body (shown on main picture at top).
Plus You Get To Choose The Color For Your Custom RC Body. We will paint , trim , decal, and mount your custom painted body to your ride!!! (Please allow 3-5 business days for painting and drying of your custom body before shipping)
Now let's get on with customizing your drift machine!
CHOOSE YOUR COLOR
Actual paint colors may vary slightly from what appears on your computer monitor.
Now let's take a look at the heart and soul of your drift machine!
Motor Type Electric Brushed
Transmission Forward and Reverse
Drive System 4 Wheel Drive
Ground Clearance 4.5mm
Chassis Type Plastic
Shocks Aluminum Body Oil Filled
Speed Control Brushed ESC
Battery 7.2v 2000mAh NiMh & Charger Included
Radio System 2.4GHz Radio System
The Thunder Drift is ready to light up the track right out of the box! This belt driven car comes complete with an electric brushed motor, forward/reverse function, four wheel drive, and a 2.4GHz radio system. This electrifying vehicle is fully equipped with drift RC racing tires, a vivid polycarbonate body, oil filled shocks, battery and charger. Just add 8 AA batteries to the remote and you will be drifting in no time!
Complete 2.4GHz Radio System Included And Installed !!!
Please Note: Your Car Will Arrive With Black Wheels Which May Differ From The Main Image Above
Needed To Run
You will need 8 aa batteries (purchase below)
Optional Charger and Extra Batteries Accessories
Your car will arrive with one 7.2 volt battery, we recommend picking up extra batteries now to keep your car running while your original battery is recharging. The higher the "mah" number the longer the run time you will get out of your ride (purchase below)
Your car will arrive with a standard charger. Charge time per battery is around 4-6 hours. We highly recommend picking up the quick charger shown below. This will cut your charge time down to around 20 minutes depending on the size of your battery pack (purchase below)
You can also add light kits to your ride (purchase below)
HPI Drift Assist D-Box
The HPI D-Box makes it easy to drift as it keeps your car from oversteering during turns. It is not necessary to have a D-Box to drift your car, it just makes you look like a Pro Drifter right from the start without hours of practice (purchase below)
Limited 90 Day Warranty
All warranty claims must be handled through Redcat Racing directly and not RC-Tradingpost. If you have any questions about the operation of your vehicle or believe you have received a defective item you must contact Redcat Racing directly at 1-602-454-6445 (Monday - Friday 9am - 5:00pm Mountain Standard Time)
If you believe you have a warranty claim, simply CLICK HERE to go to www.redcatracing.com to fill out the warranty claim form and include all information associated with the claim.
If you have a specific part problem Redcat Racing will determine if the issue in question is covered under warranty and will contact you within 3 business days after form submission. If determined that the part or parts are covered under warranty, Redcat will send you the part(s) at no charge. We may ask for some parts to be returned prior to sending out replacement parts such as remote controls, engines and possibly some other items.
If you have a vehicle problem, please fill out the warranty claim form and click on the vehicle button. Once the form is approved, you may send the entire vehicle back to Redcat Racing and the Redcat technicians will repair your vehicle at no charge for labor but may require payment for parts needed if they are not covered under warranty. We will require payment for shipping the item back to you.
Car Warranty - Nitro, Electric and Gas Vehicles Link Here
Lifetime Gas and Nitro Engine Replacement Program Link Here
Lifetime Electronics Replacement Program Link Here
Aircraft Warranty Link Here
Drive train and suspension parts Not Covered Under Warranty
Gears Including spur, clutch-bell and others Not Covered Under Warranty
Clutch & Clutch Spring Not Covered Under Warranty
Pull Start Not Covered Under Warranty
These warranties cover defects with the materials, workmanship, or assembly at factory only. All replacement parts and warranty approvals are at the sole discretion of Redcat Racing.
These warranties do not cover breakage due to abuse, improper break-in, improper setup, or improper operation.
By purchasing this item you agree to the terms of this warranty.
INCLUDES: One Ultra-Brite Head Light/Tail Light Wire Harness Set Prewired with
two white lights (headlights), two red lights (taillights) and
one 9V battery connector.
One Instruction Sheet.
One Ram Logo Stick Sheet
This is the HPI D-BOX 2 Adjustable Stability Control System.
**Not compatible with the Airtronics SSR Mode.**
Compatible with drift cars as well as all types of on and off-road
vehicles including nitro racers, touring cars, monster trucks and
Provides perfect control in turns under slippery surfaces like wet
pavement, muddy conditions, loose dirt and wet clay tracks
Connects between steering servo and receiver
Allows steering inputs from transmitter to have priority over the
gyro, in high powered off-road cars increasing throttle will not
spin the car out, even in slippery conditions
Also prevents sliding in sudden braking or steering
Four sensitivity modes;
Mode 0 has characteristics of original D-BOX with gyro compensation
present from steering action provided by radio
Modes 1, 2 and 3 offer earlier steering response through
transmitter and less from gyro
D-BOX 2 Adjustable Stability Control System with Instructions
Dimensions: 1 x 1.1 x 0.39" (26.5 × 27.0 × 10.0mm) excluding wire
Operating Voltage: 4.8V-7.4V
Power Consumption: 10mA/6V
Neutral Servo Signal: 1.5mSec (1.45-1.55mSec)
Servo Signal Cycle: 3-22mSec (Digital servo mode support)