1/10 Twin Hammers 1.9 Rock Racer RTR V2 - YouTube
Video will open in a new window
Independent cantilever front suspension
4-link, solid-axle rear suspension
Adjustable, oil-filled, aluminum, coil-over shocks
Waterproof electronics (see manual for more details)
Spektrum™ DX4C 2.4GHz 4-channel computer transmitter
Scale lights, cockpit and body panels
Shift-on-the-fly, two-speed transmission
Dynamite® waterproof ESC
Dynamite 15-turn brushed motor
12mm wheel hexes
Dynamite 2S 7.4V 2000mAh Li-Po battery
Dual-position battery tray for use with optional batteries
Beadlock wheels with Race Claw 1.9 scale tires
Molded chassis and multi-piece roll cage
Compatible with AVC technology
Every year, hundreds of rock racers descend on California’s Johnson Valley to take on the world’s most grueling trails. The two toughest trails, the Jackhammer and Sledgehammer, are known as the Twin Hammers. Now you too can take on any terrain with the Twin Hammers rock racer. This 1/10-scale recreation is based on a full-scale rock racer and engineered to look, and perform, just like the real thing.
Rugged 4WD Chassis with Long-Travel Suspension
The Twin Hammers® chassis has long-travel suspension with a solid rear axle, just like many full-scale rock racers. This gives you all the footing you need when crawling through rock-filled ravines or blasting across the flats.
The shift-on-the-fly, two-speed transmission lets you take better advantage of the 4WD on different types of terrain. Drop it into low gear when you have to crawl over a pile of rocks and then shift back into high when you reach the other side. It’s almost like having two off-road vehicles in one.
A waterproof receiver, speed control and steering servo let you drive in the real world, where things get wet and the weather is often less than perfect.
Includes a Spektrum™ DX4C Computer Transmitter
An incredibly capable off-road machine deserves an equally capable transmitter. The Spektrum DX4C is just such a transmitter. In addition to 20-model memory and the unbeatable signal security of DSMR™ 2.4GHz technology, it gives you advanced software that includes programming for AVC® (Active Vehicle Control™) receivers. The best part? You get all these extras for the same price you would if a standard transmitter had been included.
Approximate Assembly Time: No assembly required
Ball Bearings: Complete
Batteries: 7.4V 2200mAh 2S Li-Po pack
Body: Roll Cage with Painted body
Charger: Lipo Balance Wall Charger, 800mah, 110V-240V
Completion Level: Ready-To-Run
Differential: Front gear diff, rear locked
Final Drive Ratio: Low: 32:1 High 18:1
Front Track: 9.75 in (247.7mm)
Gear Pitch: 48-Pitch
Ground Clearance: 2 in (51mm)
Height: 6.9 in (175mm)
Internal Gear Ratio: Low: 4.05:1 High: 2.27:1
Length: 18 in (457mm)
Motor Size: 540
Motor Type: Brushed
Painted or Clear Bodies: Painted
Radio: Spektrum DX4C
Rear Track: 9.75 in (247.7mm)
Shock Type: Oil-filled aluminum
Speed Control: Included
Spur Gear: 78T
Suspension: Cantilever front, trailing arm rear
Tire Compound: Blue
Tire Diameter: 4.1 in (104mm)
Tire Tread: Race Claws
Track: 9.5 in (241.3mm)
Vehicle Type: Rock Racer
Wheel Diameter: 1.9"
Wheel Type: 1.9 in Beadlock
Wheel Width: 0.75 in (19mm)
Wheelbase: 11.6 in (295mm)
Width: 9.5" (241.3mm)
All warranty claims must be handled through Vaterra directly and not RC-Tradingpost. If you have any questions about the operation of your vehicle or believe you have received a defective item you must contact Vaterra directly.
These warranties cover defects with the materials, workmanship, or assembly at factory only. All replacement parts and warranty approvals are at the sole discretion of Vaterra. These warranties do not cover breakage due to abuse, improper break-in, improper setup, or improper operation. By purchasing this item you agree to the terms of this warranty.