1/10 1969 Camaro SS V100-S 4WD Brushless RTR RC Touring On Road Car Waterproof

Product Description
Key Features
Officially Licensed 1969 Camaro SS Body
Metal Shaft-Driven 4WD
Low Profile Tires on Large Diameter Wheels
Waterproof Electronics*
Dynamite® 3300Kv Brushless Power System
Dynamite 3000mAh 2S Li-Po and charger (Included battery not available separately. Please see parts listing for battery options)
Spektrum™ DX2E 2.4GHz Transmitter with Batteries Included
Sealed Gear Boxes
Oil filled Shocks
Double Wishbone Suspension
Full Ball Bearing Drivetrain
Wheels are interchangeable with most HPI and Tamiya wheels **
Needed To Complete
Nothing! Everything you need is in the box!
Overview
Green. Tires scream as 396 cubic inches of big block aggression comes off the leash. Your neck muscles tense as acceleration pins you to the seat and hurls you forward. The edges of your vision bends into a blur. Your heart pounds. All you see in the rearview mirror is a cloud of white smoke and two lines of molten rubber rapidly fading into the distance. Such was the scene at many a traffic light when the 1969 Camaro SS first hit America’s streets. Even today, the sight and sound of a ’69 SS easing up to the line can send chills down the spine of anyone who loves muscle car legends.
The Vaterra® 1969 Camaro SS sport coupe is less an RC car and more a statement of intent. Like its legendary inspiration, its aggressive lines and awesome power make it abundantly clear it was built to misbehave. Equipped with a Dynamite® 3300Kv brushless power system and 3000mAh 2S Li-Po, it can blow the doors off most cars in its class, right out of the box. But straight line speed isn’t all it has going for it. A low center of gravity, double wishbone suspension, wide tires and shaft-driven 4WD give you all the traction and control you need to carve the corners too.
*For complete details on waterproof standards, please refer to the product instruction manual.
Ball Bearings: Complete
Battery: Speedpack Silver 7.4V 3000mAh 2S 20C Lipo
Body: Polycarbonate, painted
Charger: 10W LiPo AC Balance Charger
Chassis: Injection-molded
Completion Level: Ready-To-Run
Drivetrain: 4WD shaft drive
Final Drive Ratio: 2.66:1
Gear Pitch: 48-Pitch
Ground Clearance: 0.25 in (6mm)
Internal Gear Ratio: 3.5:1
Motor Type: Non-Sensored Brushless
Painted or Clear Bodies: Painted
Pinion: 28T
Servos: Included
Shock Type: Injection-molded friction
Size/Scale: 1/10
Speed Control: Included
Spur Gear: 77T
Suspension: Independent
Tire Diameter: 2.76 in (70mm)
Tire Tread: Multi Purpose tread
Vehicle Type: Sedan
Wheel Diameter: 2.16" (54mm)
Wheel Type: GTR
Wheel Width: 1.05" (26MM) & 1.2" (30mm)
Warranty
All warranty claims must be handled through Vaterra directly and not RC-Tradingpost. If you have any questions about the operation of your vehicle or believe you have received a defective item you must contact Vaterra directly.
These warranties cover defects with the materials, workmanship, or assembly at factory only. All replacement parts and warranty approvals are at the sole discretion of Vaterra. These warranties do not cover breakage due to abuse, improper break-in, improper setup, or improper operation. By purchasing this item you agree to the terms of this warranty.